3Racing CY-34 Graphite Pivot Mount Shim 0.5mm & 1mm for Hot Bodies Cyclone Sport / Racing Versions  [CY-34]

Graphite pivot mount shim for Cyclone

This graphite pivot mount shim set is a scale RC accessory intended to provide precise spacing at the pivot/mount area on compatible Cyclone variants. The 0.5mm and 1mm shim thicknesses let you fine-tune pivot clearance and alignment without replacing parts, helping to dial in handling balance for different track surfaces.

Installation is straightforward for hobbyists familiar with basic chassis work: remove the pivot mount fasteners, add the shim between the mount surfaces as required, and reassemble with correct torque on mounting screws. Use caution to keep mating surfaces clean and to avoid over-tightening which can compress the shim or alter the intended spacing.

Tuning role: use the thinner 0.5mm shim for minor clearance correction or to reduce binding, and the 1mm shim when a larger offset is needed for corrective alignment or to change effective suspension geometry slightly. These shims are a low-weight option for incremental adjustments during setup sessions.

Compatibility

• Hot Bodies Cyclone Sport Version
• Hot Bodies Cyclone Racing Version