3Racing M4WD-24 1/32 4WD M2 x 20 Socket Button Screw Steel spare part  [M4WD-24]

Tamiya Mini 4WD M2 x 20 Scoket Buttom Screw_Steel - 3RACING M4WD-24
Price:
USD$1.90
Brand:
3Racing
Model:
M4WD-24
Condition:
Brand New
Write a review

3Racing M4WD-24 steel M2 x 20 socket button screw for Mini 4WD maintenance

This M2 x 20 socket button screw is a simple steel replacement fastener aimed at Mini 4WD maintenance and part replacement. It matches common mounting points on Tamiya Mini 4WD bodies and chassis where an M2 threaded fastener is specified. The socket head provides a low-profile bearing surface while allowing installation with a compatible hex driver.

Use this screw where the original plated or alloy fastener has been lost, worn, or stripped. Steel construction offers durability for repeated assembly cycles, but builders should be mindful of potential galvanic contact with dissimilar metals and avoid over-torquing when threading into plastic or thin sheet components.

Fit and clearance depend on body and component design; confirm thread engagement depth and head clearance before final assembly. For routine maintenance, pair with appropriate M2 washers or nylon washers where needed to protect painted surfaces and reduce loosening under vibration.

Is this M2 x 20 screw compatible with Tamiya Mini 4WD chassis?

The M2 x 20 steel socket button screw fits standard M2 threaded mounting holes used across many Tamiya Mini 4WD bodies and chassis; confirm length and head clearance for specific parts before use.

What driver size is required to install the socket head?

A compatible M2 socket driver or hex bit sized for the screw head should be used; match the driver to the socket recess to avoid rounding the head during installation.

Are these screws suited for repeated assembly and disassembly?

Steel screws are durable for repeated use, but inspect threads for wear and avoid cross-threading into plastic parts to maintain reliable engagement over multiple cycles.

Should I use washers with this screw on painted body panels?

Using small flat or nylon washers helps protect painted surfaces and spreads clamping load; choose washer outer diameter to clear the socket button head without interfering with clearances.

Can this screw replace original Tamiya fasteners directly?

In many cases yes, but always verify thread length and head profile against the original fastener to ensure proper fit and to avoid interference with other components.

Copyright © 2008-2026 rcjaz.com All rights reserved