APC AP11080EP PROPELLER 11x8EP ELECTRIC REVERSE/PUSHER  [AP11080EP]

Propeller fitment and tuning

This APC AP11080EP propeller is an RC-scale electric propeller intended for reverse or pusher installations on electric models. It is designed to be used with electric motors and appropriate prop adapters, and its 11x8 profile affects thrust and RPM behavior more than low-speed torque.

Installation notes: confirm shaft diameter and adapter match before mounting, tighten the nut to manufacturer torque recommendations, and ensure the prop is oriented for pusher/reverse rotation so blade pitch produces thrust in the intended direction. Check for correct rotation from the motor and ESC before first run.

Tuning guidance: diameter and pitch determine static thrust and cruising RPM, so pair this 11x8 propeller with a motor and ESC combination suited for higher RPM ranges rather than low-RPM torque setups. Balance the propeller and inspect blades for nicks after use to maintain predictable handling and motor load.

Safety and maintenance: always balance before flight, replace if blades are chipped, and keep a safe distance during engine run-up. Use appropriate locking hardware and thread lockers when recommended for your prop adapter system.