APC AP13065E Propeller 13x6.5E Electric replacement prop for electric RC models  [AP13065E]

Electric propeller for RC models

This AP13065E propeller is presented as an RC-scale replacement propeller intended for electric-powered models. It carries the 13x6.5 sizing used to describe diameter and pitch, and is intended to be matched to motor RPM and aircraft aerodynamics rather than to full-size applications.

Installation guidance: verify the motor shaft diameter and hub fit, use the correct collet or prop adapter for your motor, and secure the prop with the proper nut or retaining device. After mounting, spin the prop by hand to confirm clearance from the airframe and control surfaces.

Tuning role: the 13x6.5 dimension affects thrust and top speed—higher pitch generally shifts the powerband toward speed while reducing static thrust. Use incremental tests with telemetry or a static thrust meter where available, and monitor motor temperature and ESC load when changing prop size.

Maintenance notes: routinely check for nicks, cracks, and hub wear, and rebalance if vibration appears. Replace the prop if any structural damage is found.