APC AP13065EP PROPELLER 13x6.5EP Electric Reverse/Pusher  [AP13065EP]

Electric reverse/pusher propeller

This APC AP13065EP propeller is an RC-scale propeller intended for electric propulsion setups in model aircraft. The product designation 13x6.5EP identifies its nominal diameter and pitch and the EP label indicates suitability for electric pusher or reverse orientation on model installations.

Installation guidance: mount on the motor shaft with the correct rotation direction and secure hub hardware to the manufacturer's torque recommendations for your motor and prop adapter. Check blade orientation when fitting the unit for pusher use so the blade face and pitch align with intended thrust direction.

Tuning role: swapping to this size changes the motor load, RPM window and thrust profile. Use a wattmeter to monitor current draw during initial bench tests, and balance the propeller before flight to reduce vibration that can affect servos, ESCs and airframe components.

Practical notes: always verify hub diameter and thread or collet compatibility with your motor, confirm clearances for prop wash and control surfaces on pusher installations, and perform short low-throttle taxi or glide checks after first fitment.