APC AP15012W Propeller 15x12W Wide Blade  [AP15012W]

15x12W Wide Blade Propeller

The APC AP15012W is an RC-scale propeller offered as a direct replacement or spare for models that accept 15x12 props. As a wide blade design it shifts the thrust/efficiency balance toward higher static thrust at lower speed, which is useful during takeoff and low-speed manoeuvres on many sport and scale models.

Installation is straightforward for standard model setups: mount the prop on the hub or adapter supplied by your airframe or spinner system, secure with the correct nut or retaining device, and ensure the rotation direction matches motor rotation. Maintain proper clearance to the fuselage and spinner to avoid contact at full pitch.

Before flight, confirm the prop is dynamically and statically balanced and that the blade surfaces are free of cracks, nicks, or deformation. Small imbalance or damage can cause excessive vibration that affects the motor, bearings, or airframe components. For trimming the model, try incremental pitch and throttle adjustments while keeping an eye on motor temperature and vibration.

If you replace a propeller, match the handedness and nominal size marked on the blade, and verify spinner and adapter fitment to avoid undue stress on the motor shaft or bearings.