APC AP16513W Propeller 16.5x13W Wide Blade (120 Pattern) Spare for RC Models  [AP16513W]

Wide-blade propeller for tuning

The APC AP16513W is a 16.5x13W wide-blade propeller listed as a spare part for scale RC use, featuring the 120 pattern designation in the product name. Its wider blade section changes the airflow and loading characteristics compared with narrow blades, making it useful when adjusting thrust and throttle response on electric models. This article focuses on practical fitment, basic setup checks, and how the blade affects trimming and balance during flight testing.

Compatibility is general to RC electric aircraft and park-style models that accept the 16.5x13W mounting pattern; confirm hub diameter and spinner clearance before fitting. Installation follows standard prop replacement practice: inspect the hub and shaft for damage, ensure the prop seats flush against the motor or adapter, and secure with the correct nut or washer sequence supplied by your model's hardware. Observe rotation direction marked on the prop and match it to your motor's rotation.

Balancing and trimming are central to getting predictable results with a wide-blade prop. Static balance the prop before first use, then perform a vibration check at low throttle on the ground. If vibration persists, re-check hub seating and spinner fitment, and try small trim adjustments at the control surfaces rather than using prop damage to alter performance. The wider blade often increases low-to-mid throttle thrust, so retune throttle curves and check motor temperature during initial flights.

When testing different props, record RPM and flight behavior rather than relying on impressions alone; a systematic swap and test approach produces repeatable tuning data. Use the AP16513W as part of an iterative setup process to dial in climb rate, cruise efficiency, and handling balance for your specific model and power system.