Arrowmax am-210014 Silicone Shock Fluid 59ml 900cst for R/C shocks and dampers  [am-210014]

Silicone shock fluid for R/C dampers

This Arrowmax am-210014 product is a 59ml bottle of 900cst silicone shock fluid formulated for scale R/C shock absorbers and dampers. It is sold as a service item for hobby-level suspension tuning, intended to alter damping characteristics by changing oil viscosity rather than hardware parts.

In practice the oil's primary role is to affect compression and rebound speed: higher viscosity numbers produce heavier damping and slower rebound, while lower numbers allow quicker movement. Use this 900cst grade when your setup or manual calls for increased damping compared with lighter oils.

Basic replacement steps are standard: safely disassemble the shock, drain the old fluid, inspect seals and pistons, then fill and bleed according to your shock manufacturer's procedure. Always follow the shock kit or chassis manual for recommended fill volumes and piston configurations rather than relying on generic volumes.

Store the bottle capped and upright, keep it free from dust and moisture, and avoid mixing oils of different formulations unless the manufacturer confirms compatibility. For routine maintenance, inspect for seal wear and contamination before refilling to preserve consistent damping behavior.

This 59ml bottle provides a measured supply for several shock services and tuning sessions, letting you evaluate 900cst damping characteristics across different track or surface conditions.