Arrowmax AM-210057 Silicone Diff Oil 59ml for RC  [AM-210057]

Arrowmax AM-210057 Silicone Differential Fluid 59ml 8.000cst
Price:
USD$4.51
Brand:
Arrowmax
Model:
AM-210057
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Silicone differential fluid for RC diff tuning and maintenance

This Arrowmax AM-210057 silicone differential fluid is supplied in a 59ml bottle at 8.000cst viscosity. It is intended for use in RC-scale differential housings to adjust traction characteristics and steering feel. As a silicone-based fluid, it provides stable damping that helps standardize diff behaviour across temperature ranges common to hobby use.

Use this fluid when you need a measured, repeatable change to diff locking without changing mechanical components. It is suitable for most 1/10-scale touring, 1/10-scale buggy, and similar RC car differentials where silicone oils are the accepted tuning method.

Practical setup and usage

  • Volume handling: 59ml bottle provides multiple refills for standard RC diffs; transfer with a syringe or pipette to avoid contamination.
  • Tuning role: 8.000cst is a moderate-viscosity setting—use to increase diff damping compared with lower cst oils for more stable corner exit.
  • Installation tips: Clean old oil from gears and housing, apply fluid carefully to avoid overfilling, then run a few laps to allow air bubbles to escape before final setup checks.
  • Maintenance: Inspect seals and bearings when changing fluid; replace fluid after heavy use or contamination.

Compatibility notes

Designed for RC car differentials that accept silicone oil. Check your diff’s recommended viscosity range before changing; if unsure, compare with the cst values listed by your chassis manufacturer or community setup guides.

The bottle is 59ml and the fluid viscosity is 8.000cst.
Suitable for RC car differentials that accept silicone oil, commonly 1/10 touring and 1/10 buggy diffs.
Store capped in a cool, dry place; use clean tools to transfer and keep contaminants out of the bottle.

Copyright © 2008-2026 rcjaz.com All rights reserved