Arrowmax AM-700706 AM Lipo 6200mAh 2S TC Low Profile 7.4V 65C/130C Graphene Pro LiPo Battery Pack  [AM-700706]

Arrowmax AM-700706 AM Lipo 6200mAh 2S TC Low Profile - 7.4V 65C Continuos 130C Burst (Graphene Pro)
Price:
USD$83.98
Brand:
Arrowmax
Model:
AM-700706
Write a review

Low-profile 2S 6200mAh LiPo for touring

This Arrowmax AM-700706 2S LiPo is a low-profile, Graphene-enhanced battery designed for RC-scale on-road touring and stock-class use. The pack is specified at 6200mAh with a 7.4V nominal voltage and rated 65C continuous with 130C burst, delivering a low internal resistance and a stable voltage under load to support consistent motor response.

Physically compact to suit modern low-centre-of-gravity (LCG) chassis layouts, the pack helps maintain chassis balance while offering punch for stock-class power limits. The form factor and connector placement are intended to fit common 1/10 touring battery bays; verify clearance and cable routing on your specific chassis before installation.

When installing, position the pack to keep the centre of mass low and centered, secure with existing battery straps or mounting hardware, and ensure connectors are routed clear of servo linkages, ESC fan intakes, and suspension travel. For tuning, this pack supports conservative gearing and timing choices typical of stock-class setups, where voltage stability and low internal resistance aid throttle consistency across laps.

Specifications

  • Item: LiPo battery pack
  • Capacity: 6200mAh
  • Voltage: 7.4V (2S)
  • C Rating: 65C continuous, 130C burst
  • Dimensions: 139 x 47 x 25 mm
  • Weight: 288 g
  • Material: Graphene Pro cells
  • Model Number: AM-700706
  • Compatibility: Intended for 1/10 touring and stock-class on-road platforms

Use this pack where a low-profile, stable-voltage 2S solution is needed for on-road stock or touring formats, and always follow safe charging and storage practices for LiPo cells.

Connector type can vary by batch, confirm the connector supplied on the product listing or with your vendor before purchase.
The pack offers high discharge capability, but check event rules for permitted voltages and capacities for modified classes before use.
Mount low and centered in the battery bay, secure firmly with straps or velcro, and keep wiring clear of moving parts to preserve chassis balance and reliability.
Charge as a 2S LiPo using a dedicated LiPo charger, follow manufacturer recommendations for charge current and storage voltage, and avoid overcharging.
Low-profile packs reduce frontal area but maintain similar cell mass; ensure adequate airflow to ESC and motor rather than relying on battery placement for cooling.
Store at manufacturer recommended storage voltage in a cool, dry place and inspect cells regularly for damage or swelling.

Copyright © 2008-2026 rcjaz.com All rights reserved