Arrowmax AM-910036 AM Medius MID Rear Chassis Stiffener Carbon Top  [AM-910036]

Rear chassis stiffener for AM Medius MID

This Arrowmax AM-910036 is an RC-scale rear chassis stiffener top plate designed for the AM Medius MID chassis family. The component is a carbon top element intended to alter torsional behavior of the rear section, giving a predictable change in chassis flex for setup work.

The part fits into the rear chassis area and works alongside existing lower plates and suspension components to shift mid-to-rear stiffness. Installation typically requires removal of the stock top plate and reusing the original mounting points and fasteners, so familiarity with basic RC teardown is assumed.

As a tuning component the stiffener is used to fine-tune handling balance rather than cure a single issue. Increasing rear top stiffness tends to reduce rear flex under lateral loads which can affect turn-in and rear traction, while reducing it has the opposite effect. Use incremental changes during testing and adjust other settings such as toe, anti-roll bars, and shock tune to match the new chassis response.

Materials and care: the top uses a carbon construction that should be handled to avoid sharp impacts, inspect for cracks after hard runs, and ensure fasteners are torqued to avoid stripping the chassis mounting points. This is an RC part and intended only for model chassis use.