AXIAL 1/6 SCX6 Jeep 7075 Aluminum Steering Servo Arm by JAZRIDER JR-SCX607-RD  [JR-SCX607-RD]

Steering servo arm for SCX6 Jeep

This is a scale RC steering servo arm intended for use on Axial 1/6 SCX6 Jeep models as a spare or hop-up part. The component is identified by JAZRIDER model JR-SCX607-RD and is finished in red, made from 7075 aluminum as stated in the product name to provide a stiffer steering linkage compared with common plastic arms.

Design intent and role: use this arm to replace a factory servo horn or to experiment with stiffer steering linkages for tighter steering feedback and reduced deflection during crawling or trail runs. The part serves as a mechanical interface between the servo output and steering linkage on the specified 1/6 scale SCX6 Jeep platform.

Installation and tuning notes: check spline and mounting compatibility with your servo before fitting, align the arm to steering geometry, and verify neutral position prior to final tightening. Adjust steering endpoints and centering in your transmitter or ESC/servo setup after installation to confirm safe operation on your model.