Axial 1/6 SCX6 Jeep Front Shock Tower Set (Titanium) by JAZRIDER JR-SCX603-TI  [JR-SCX603-TI]

Front shock tower for Axial SCX6

This is an RC-scale front shock tower intended for Axial 1/6 SCX6 Jeep chassis use. The part replaces the stock front upper mounting point to offer a stiffer, more consistent attachment for the front shocks and associated linkage. It is presented as an aluminum component in the product name and is intended for hobby-grade scale trail setups only.

Installation notes: fitment follows the SCX6 front tower mounting pattern, use the existing shock and tower screws from the chassis unless replacements are supplied by the vehicle manufacturer. Basic tools such as a hex driver and a set of metric sockets are typically required. Check alignment after installation and verify no binding occurs in the steering linkages or shock shafts.

Tuning role: the tower changes the front suspension mounting stiffness and can affect spring and damping response by altering shock leverage and lateral support. Use it when you need more rigid shock mounts to reduce flex under load or to experiment with different shock angles for improved suspension behaviour on technical trails.

For scale trail rigs based on the Axial SCX6 platform this tower provides a straightforward way to stiffen the front shock mounts and tune front-end behaviour; confirm fitment with your SCX6 JLU Wrangler chassis before final installation.