Axial AX10 Deadbolt Aluminum Chassis Linkage by JAZRIDER AX10-24005-OR  [AX10-24005-OR]

AX10 Deadbolt chassis linkage

The Axial AX10 Deadbolt Aluminum Chassis Linkage by JAZRIDER is an RC-scale replacement link designed for the AX10 Deadbolt platform. Machined aluminum provides dimensional stability under load, keeping chassis geometry more consistent during slow-speed crawling and technical trail runs.

This link is intended for use where a rigid, repeatable mounting point is preferred over stock molded parts. It serves as a tuning component to adjust ride height, roll center and lateral alignment when used alongside your existing suspension, steering and body mounting setup. The part color is orange for easy identification during maintenance and setup changes.

Installation notes: the link replaces an equivalent chassis link on AX10 Deadbolt frames and uses the same ball stud and mounting points as the original geometry. Check thread engagement and use thread locking on metal-to-metal joints as needed, and recheck alignment after initial runs to confirm desired chassis behavior.

Use this aluminum linkage to tighten chassis tolerance and provide a more predictable platform for tuning suspension and steering on AX10 Deadbolt builds.