Axial Racing AX10 Deadbolt Aluminum Protector for Differential Case by JAZRIDER AX10-24017-OR  [AX10-24017-OR]

Aluminum differential protector for AX10

This is an RC-scale aluminum protector designed to mount over the differential case of the Axial AX10 Deadbolt chassis. Made to offer localized protection to the diff housing, the part helps limit direct impacts to the differential shell and provides a clean hardpoint for contact with rocks and trail obstacles when driving off-road models.

Compatibility is limited to the AX10 Deadbolt family as stated in the product name. The component is supplied in orange anodized finish and is intended as a bolt-on hop-up to supplement chassis protection without changing internal diff geometry.

Installation is straightforward for hobbyists: remove the chassis mounting screws that access the differential case, position the protector over the diff housing, and secure with the original mounting points. Minimal trimming or modification should be required on a standard AX10 Deadbolt setup; verify screw lengths and thread engagement before final tightening.

Tuning role: this protector does not alter gear ratios or internal diff behavior, it is a structural hop-up to reduce shell damage and minor chassis flex at the diff interface. Pair with appropriate skid plates or lower links for a balanced protection strategy during aggressive trail or rock running.