This 6 pcs adjustable link set is an RC-scale steering and suspension link upgrade designed for Axial Racing SCX10 chassis with a 315mm wheelbase. The parts are aluminium, intended to replace stock plastic links where users need a stiffer connection and fine length adjustment for alignment and handling tweaks.
Installation is straightforward for hobbyists familiar with link removal: remove the existing links from the steering knuckles and axle mounts, match left/right orientation, and fit the adjustable turnbuckles with the original ball ends or supplied rod ends. Use a small spanner or hex driver for final adjustment and lock the turnbuckles to the required length to prevent loosening under use.
In tuning, these adjustable links let you correct toe, caster, and ride height differentials incrementally; small changes to link length affect steering response and roll center geometry, so make adjustments in small steps and test on a representative surface. The aluminium construction reduces flex compared with plastic, offering crisper inputs while remaining an RC-only component for scale and performance adjustments.
Use these links when you need metal adjustability for steering and suspension geometry on a 315mm SCX10 setup, keeping adjustments conservative and testing progressively for predictable results.
Copyright © 2008-2026 rcjaz.com All rights reserved
