Chassis lift up combo
This aluminium lift-up combo converts a standard SCX10 II chassis ride height from 77mm to 100mm, intended for scale RC crawling setups that require extra ground clearance at the chassis level. The kit is an RC-scale accessory designed to alter the distance from the ground to the chassis only, it is not for full vehicle conversion or real-vehicle use.
The assembly uses one adjustable tie rod to set the chassis slope and ride height fine tune. When the tie rod is set to its longest position the chassis sits at the higher limit, when set to the shortest position it returns toward the lower setting. The adjustable tie rod is a single effective adjustment point that changes the overall chassis rake and helps balance drivetrain and suspension geometry for crawling lines.
Original damper mounts are retained so standard shock hardware and mounting positions remain usable. This allows you to keep your existing shocks while changing chassis height, avoiding additional shock rebuilds in many setups.
Included hardware and components: Stainless Steel Button Head Screw 3*30 - 1pc, 3*25 - 2pcs, 3*20 - 8pcs, 3*18 - 5pcs, 3*16 - 4pcs, 3*14 - 5pcs, Stainless Steel Flat Head Screw 3*16 - 1pc, PEEK/Pelrin collars - 4pcs, aluminium balls - 4pcs, 3*6*6 aluminium collar - 1pc, SCX2 ball ends 5.8*7.5 balls - 2pcs, 4*2.5 O-rings - 4pcs, 2.5*M4*11 screw shafts - 4pcs.
This lift-up combo is intended as a tuning component to increase chassis clearance and alter chassis rake for SCX10 II builds using AX90046-compatible frames, providing a single-point adjustable tie rod for quick ride-height adjustments without replacing original damper mounts.
