Axial Racing SCX24 Brass Wheel Hex Hubs Adapter (+5mm Offset) by JAZRIDER JR-SCX2414-BK  [JR-SCX2414-BK]

SCX24 Brass Hex Hub Adapter

This adapter is an RC-scale wheel hex hub designed for the Axial SCX24 platform and supplied under the JAZRIDER JR-SCX2414-BK part reference. Made from brass and listed at 10g each in the product name, the piece provides a fixed +5mm wheel offset per hub to change wheel track and stance on 1/24 scale crawlers.

As a tuning component, the adapter shifts the wheel mounting point outward, affecting wheel clearance and the visual stance of the model rather than altering drive components. Expect changes in wheel-to-fender spacing and possible adjustments to wheel hex screw length or wheel inner clearance when installing thicker offsets.

Installation notes: fit the adapter onto the existing wheel hex following the vehicle maker's wheel fastening method, verify concentricity after tightening, and check wheel spin for interference. Use correct-size hex screws and verify any wheel or hub fit with the vehicle's wheel inner diameter and bearing locations before final driving.