Axial Racing Yeti Aluminum C Hub Carrier by JAZRIDER YT-25001-GU  [YT-25001-GU]

This gunmetal aluminum C hub carrier is an RC-scale replacement part made for the Axial Yeti platform and supplied by JAZRIDER as model YT-25001-GU. It swaps directly with the stock C-hub carrier using the same mounting pattern, giving a stiffer connection between the steering knuckle and suspension upright.

Functionally, the carrier's role is to support the steering knuckle pivot and maintain wheel alignment under load. Upgrading to an aluminum carrier reduces flex in that joint compared with typical plastic pieces, helping the chassis keep consistent steering geometry when the model encounters rough terrain or high cornering forces.

Installation is a direct replacement process: remove the wheel and knuckle assembly, unfasten the original C hub carrier, and install the aluminum unit with the existing fasteners and hardware. Check fastener fit and movement through the steering arc after installation to confirm clearance and smooth operation.

Tuning notes: because aluminum alters stiffness at the steering pivot, expect slightly crisper steering feedback. When tuning suspension or toe settings, recheck toe-in and steering centring after swapping to ensure predictable handling.