Axial Racing Yeti Graphite Rear Link Stiffeners by GPM GYT017  [GYT017]

Graphite rear link stiffeners for Yeti

This GPM GYT017 kit is an RC-scale rear link stiffener produced for the Axial Racing Yeti platform, supplied as 1 pr. Intended as a chassis-level hop-up, the graphite insert targets the rear link area to reduce flex where the links attach to the suspension, helping to stabilise rear-end behaviour without changing suspension geometry.

Material choice and placement are geared toward balancing added rigidity with low mass; graphite provides increased stiffness compared with stock plastic parts while keeping weight modest. The part acts as a structural reinforcement rather than a suspension element, so its role is to change how loads transfer through the rear link assembly during cornering, landings, and chassis roll.

Installation notes: the stiffener replaces or complements the original rear link components at the indicated mounting points and uses the existing hardware. Basic disassembly of the rear link area is required, and alignment should be checked after installation to confirm no unintended binding. Use conservative tightening to avoid overtensioning the link pivots.