Axial Racing Yeti XL 150mm L-shape Damper for Front/Rear by GPM YTL150F/R/L  [YTL150F/R/L]

L-shape Damper for Yeti XL

This aluminium L-shape damper is a scale RC spare designed for the Axial Racing Yeti XL platform. It comes as a single pair (1pr) sized at 150mm and uses a 6mm steel shaft. The component is intended to replace or upgrade the front or rear shock assembly where an L-shape orientation is required by the chassis layout.

Fitment and role: the damper is specified for Axial Racing Yeti XL compatibility and functions as part of the suspension system to influence ride height, damping response, and wheel control. Because it is adjustable, it supports basic tuning ranges without altering other suspension geometry.

Installation notes: the unit is supplied as a finished damper assembly, confirm the Axial Yeti XL mounting points match the L-shape shock ends before installation. Standard hardware from the original configuration is typically reused, retain existing ball ends and mounting pins when possible. Perform a test fit to verify travel and clearance on both front and rear locations.

Maintenance and tuning tips: check shaft straightness and seal condition during routine service, use compatible shock oil and spring rates for desired behavior, and index adjustments incrementally to assess handling changes.

This damper provides a direct aluminium replacement option for Axial Yeti XL builders and tuners seeking a 150mm L-shape front/rear unit with a robust 6mm steel shaft; use it to refine suspension feel while retaining stock geometry.