Axial Racing Yeti XL Aluminium spur gear adapter + 32 pitch 65T steel spur gear set by GPM YTL1665T  [YTL1665T]

Spur gear adapter and 65T spur for Yeti XL

This is an RC-scale replacement and hop-up set consisting of an aluminium spur gear adapter paired with a 32 pitch, 65T steel spur gear, supplied as a 2pcs set. The items match the part references listed in the source name and are intended for use on the Axial Racing Yeti XL platform.

The adapter provides the mounting interface between the spur gear and the axle/bearing carrier, while the steel 65T spur gear supplies the tooth count and pitch required for this drivetrain combination. Installation requires checking gear mesh and alignment within the stock gearbox and confirming there is clearance for a 32 pitch gear of this diameter.

When fitting, verify the pinion-to-spur mesh by rotating the drivetrain by hand before powering the model, and confirm the adapter seats flush against its mating surface. Keep bearings and gearbox faces clean to ensure consistent mesh and to avoid premature wear of mating teeth.

This set is a direct-scale RC accessory intended for parts replacement or drivetrain tuning on the Axial Racing Yeti XL chassis; follow standard gear-mesh checks during installation.