AXIAL RBX10 RYFT Aluminum 7075 25T Servo Horn by GPM RBX025TSH  [RBX025TSH]

Aluminum 25T servo horn for RBX10 RYFT

This GPM aluminum servo horn is an aftermarket 25T replacement designed for scale RC steering systems that need a durable, adjustable arm. Machined from 7075 T6 aluminum, the straight-arm profile and high tensile material keep the part stiff while keeping weight reasonable. A built-in spring cushions impacts to reduce shock transmitted to the steering gear during hard landings or contact.

The two-hole positioning lets you change tie-rod attachment points to fine-tune steering throw and response without altering servo endpoints. Note that this horn is made for 25T splines only and is not compatible with 23T servos.

Installation is direct: remove the stock horn, fit the 25T spline onto the servo, secure with the supplied screws, and set the tie-rod to the preferred hole to adjust steering sensitivity and centering. As an aftermarket part, its primary role is steering tuning and protecting the servo from sudden shocks through the integrated spring.

Use this horn when you need a stiffer aluminum arm with impact protection and quick steering leverage changes; confirm your servo spline is 25T before fitting.