Axial SCX-10 Aluminum Steering Linkage (Silver) by JAZRIDER ASCX10-22403-02-S  [ASCX10-22403-02-S]

Aluminum steering linkage for SCX-10

This is an RC-scale steering linkage designed for Axial SCX-10 chassis use, offered in a silver aluminum finish by JAZRIDER. It serves as a direct replacement steering link to maintain or restore steering alignment in scale crawlers where the original plastic or bent link has reached its service limit.

Installation is typical for tie-rod style steering links: remove the old linkage, check ball ends or rod ends for wear, fit the new aluminum link, and re-tighten to the correct thread engagement. Basic tools such as a hex driver and standard wrenches are normally sufficient. Verify clearance to the servo horn and suspension travel while the wheels are at full lock.

As a tuning component, an aluminum steering linkage gives a firmer connection between steering components and can help keep consistent toe settings under load. Use this part when you need a durable, dimensionally stable link for repeated crawling sessions, bearing in mind that final steering behavior also depends on servo setup, tie-rod length, and suspension geometry.