Axial SCX6 1/6 Aluminum Steering Knuckle Carriers C-Hubs by JAZRIDER JR-SCX602-TI  [JR-SCX602-TI]

Aluminum steering knuckles for SCX6

This aluminum steering knuckle carrier and C-hub set is produced for 1/6 scale Axial SCX6 Jeep models and supplied by JAZRIDER as JR-SCX602-TI. The set is intended as a direct replacement or upgrade for scale crawlers where buyers want metal steering components to match chassis durability and tuning adjustments in trail and rock crawling use.

The package focuses on the steering pivot points: C-hubs mount to the axle housing and knuckle carriers locate the steering knuckles and wheel hex. Replacing plastic parts with aluminum changes wear characteristics and offers firmer feedback under load, which helps when adjusting toe, caster, or steering link geometry on a tuned SCX6 setup.

Installation notes: use the existing hardware and follow the vehicle chassis service procedure, check thread engagement for all hex screws, and confirm clearances with the suspension and wheel hubs before final tightening. If reusing bearings or seals, verify they seat correctly in the aluminum bores to avoid binding.

For builders updating a scale SCX6 crawler, this aluminum knuckle and C-hub set provides a serviceable path to stiffer steering linkage and simplified geometry adjustments; ensure compatibility with your wheel hex and bearing stack before final installation.