Axial SCX6 Jeep 1/6 Aluminum Steering Knuckle Carriers C-Hubs by JAZRIDER JR-SCX602-RD  [JR-SCX602-RD]

Aluminum steering knuckle and C-hub set

This is an RC-scale replacement steering knuckle carrier and C-hub set designed for Axial 1/6 SCX6 Jeep models. The red aluminum parts replace standard plastic components to provide a stiffer mounting point for the steering knuckles and C-hubs, with the goal of reducing flex under load and keeping steering geometry consistent during crawling and trail use.

Fitment is intended for the Axial SCX6 1/6 Jeep chassis family, and the parts are offered as an upgrade option for hobbyists who prefer metal suspension components. Installation requires removing the stock carriers and C-hubs and installing the aluminum pieces in the same mounting locations; verify alignment and full travel of the steering linkage after installation to avoid binding.

In tuning terms, switching to aluminum carriers affects the system stiffness and response. Expect firmer steering feedback and less deformation when landing or negotiating obstacles, which can change wheel toe and caster under load. Use alignment checks and incremental adjustments to steering trim and suspension settings to integrate the new parts into the vehicle's overall setup.

These aluminum carriers and C-hubs serve as a durable alternative to plastic stock parts for the Axial SCX6 1/6 Jeep line, useful where reduced flex and consistent steering geometry are desired; confirm compatibility and inspect fit during installation.