AXIAL SCX6 Jeep JLU Wrangler 4WD 145mm Aluminum Thickened Spring Dampers by GPM SCX6145F/R  [SCX6145F/R]

Aluminum 145mm Front/Rear Dampers

This is an RC-scale front/rear damper set designed for AXIAL SCX6 platforms, supplied as two dampers for replacing standard units. The dampers use 6061 T6 aluminum alloy for the body, with a sealed shock-absorb cap to reduce leakage and preserve damping performance under trail and crawler use.

Key design changes from common stock parts are focused on durability and tuning feedback: the coil spring wire diameter is increased from 2.1mm to 2.2mm for firmer spring behaviour, the damper shaft is thickened from 5.0mm to 7.0mm and polished to reduce bending risk, and the top spring retainer provides mechanical adjustment of spring preload and perceived hardness.

Fitment is intended for front or rear mounting on compatible SCX6 axles; installation replaces the OEM dampers and retains the vehicle's damping adjustment method via the top retainer. In service the components reduce internal friction and absorb impact loads to help keep an RC crawler more balanced on uneven terrain.

Use these aluminum 145mm dampers when you need stiffer springs, a thicker polished shaft for reduced flex, and adjustable preload for tuning balance on AXIAL SCX6 scale crawlers.