This 20pcs aluminum ball end set is an aftermarket replacement designed for the AXIAL SCX6 scale crawler, supplied by GPM as SCX6162/BE. The kit replaces original plastic ball ends across steering and link bars with machined 6061 T6 aluminum components intended for RC-scale use only.
The set uses clockwise and anticlockwise threads on the rod ends to allow length adjustment without removing the linkage, and each tie rod end includes a positioning hole for fine tuning by inserting a suitable tool. These metal ball ends aim to increase joint durability and provide a more consistent steering feel and link stability during typical off-road RC running.
Installation notes: swap the original plastic ends for the aluminum units on the front steering tie rods, servo linkage, and front/rear link bars, then adjust overall toe and link lengths by rotating the threaded bodies and locking to desired alignment. No additional tools are included with the kit.
AXI254006
For builders tuning a 1/6 AXIAL SCX6 crawler, this GPM aluminum ball end set provides a direct swap to metal rod ends for improved wear resistance and adjustable linkage geometry without altering the chassis or steering servos.
Copyright © 2008-2026 rcjaz.com All rights reserved