AXIAL SCX6 Jeep JLU Wrangler 7075-T6 Aluminum 17mm Hex Adapters (+20mm) and Wheel Locks by GPM SCX6010+20MM  [SCX6010+20MM]

17mm Hex adapters and wheel locks

This is an RC-scale wheel hex adapter and wheel lock set designed for AXIAL SCX6 Jeep JLU Wrangler applications. The kit uses 7075-T6 aluminum for the adapters and a combination of set screws and steel pins for mechanical retention. The primary function is to increase track width by +20mm and provide a secure interface between the knuckle arms and 17mm wheel hexes to improve lateral stability during steering and technical maneuvers.

The adapters feature internal knurling and an extended wheel lock section that helps clamp the wheel more tightly to the hex, reducing the chance of loosening while still allowing disassembly when needed. The hex geometry is 17mm with a 20mm length, intended for large 17mm wheel hubs commonly used on this RC chassis. Installation requires aligning the adapter on the axle hex, securing with the included set screws and inserting the steel pin for positive retention.

Use this kit when you need a controlled increase in track width and a reliable wheel retention method on AXIAL SCX6 RC setups; inspect set screws and pins after initial runs and recheck periodically for tightness.