AXIAL SMT10 125mm Aluminium Front/Rear Adjustable Shock by GPM MJ125F/R  [MJ125F/R]

Aluminium adjustable shock for SMT10

This MJ125F/R shock set is an RC-scale front and rear adjustable damper made for AXIAL SMT10 chassis, supplied by GPM. The unit uses an aluminium body and is specified at 125mm eye-to-eye length, intended for hobbyists tuning suspension behavior on scale crawlers and trail rigs.

The design emphasis is on serviceability and tuning: the adjustable feature lets you change preload and static ride height without replacing springs, and the aluminium construction provides a stiffer mounting point compared with plastic housings. Use the shock as a direct replacement on AXIAL SMT10 mounting points where 125mm eye-to-eye dampers are specified.

Installation notes: verify mount orientation and eyelet alignment before final tightening, check for binding through full suspension travel, and confirm that provided fasteners match your chassis’ thread and clearance. Regular inspection of seals and fluid is recommended for consistent damping performance.

For SMT10 builders looking to refine suspension feel, this aluminium 125mm adjustable pair offers a direct, serviceable option for tuning ride height and preload in RC scale off-road setups.