Axial Yeti aluminium spur gear adapter + 32-pitch 64T steel spur + fibre slipper pad by GPM YT1664T39  [YT1664T39]

Aluminium spur gear adapter set for Axial Yeti

This is a multi-part replacement set for Axial Yeti scale RC models consisting of an aluminium spur gear adapter, a 32-pitch 64T steel spur gear, and a fibre slipper pad supplied as a 5pcs set. Each component is intended to interface with the Yeti drivetrain layout to provide a durable adapter surface, a hardened steel spur for consistent tooth engagement, and a friction pad for the slipper clutch.

Focus during installation should be on correct spur mesh, shaft alignment, and slipper preload. The aluminium adapter positions the spur relative to the gearbox output, the steel 64T spur meshes with a 32-pitch pinion, and the fibre pad sits inside the slipper assembly to provide predictable slip characteristics. These parts are RC-scale drivetrain components, not for full-size vehicle use.

Check for burrs and ensure the spur runs true before final assembly, verify there is adequate clearance to avoid binding near the chassis or transmission housings, and recheck gear mesh after a short break-in run to confirm no unexpected wear appears.

This 5pcs set is intended for hobby-scale drivetrain upgrades on Axial Yeti models where a hardened steel spur and a rigid aluminium adapter are desired, while the fibre pad offers adjustable slipper behaviour.