AXIAL YETI XL 32P 68T Steel Spur Gear with Fibre Slipper Pad by GPM YTL068T39  [YTL068T39]

Spur gear and slipper pad for YETI XL

This GPM set delivers a 32 pitch, 68-tooth steel spur gear paired with a fibre slipper pad designed for AXIAL YETI XL scale RC use, supplied as one set. The component is intended specifically for the YETI XL drivetrain where a steel spur improves tooth wear resistance while the fibre slipper pad provides a predictable friction surface for slipper clutch adjustment. This is an RC-scale accessory and is not for full-size vehicle use.

Installation notes: check pinion-to-spur mesh and maintain correct backlash before tightening the gearbox cover, fit the fibre pad to the slipper plate following existing mounting holes, and verify slipper engagement under light load to avoid binding. Use standard RC maintenance practices, inspect for wear on gear teeth and the fibre pad after several sessions.

Tuning role: swapping to a steel 68T spur shifts final drive ratio and increases durability for aggressive use or longer run times, while the fibre slipper pad offers consistent slip characteristics for fine-tuning torque transfer and protecting driveline components during traction transitions.

For builders seeking a direct replacement or a durable upgrade for YETI XL drivetrains, this set provides a steel 68T spur and matching fibre slipper pad that support reliable mesh and predictable slipper behaviour when installed and adjusted to the chassis' recommended tolerances.