Awesomatix A800MMX One-Piece Upper Deck Graphite 2.0mm by Factory Pro O-ACP003  [FP-O-ACP003]

One-piece upper deck for A800MMX

This Factory Pro aftermarket upper deck is made for the Awesomatix A800MMX platform and ships as a single-piece graphite plate with a 2.0mm thickness designation. As an OEM-style replacement part, it locates to the stock upper-deck mounting points and is intended to alter chassis stiffness and the car's flex characteristics without changing suspension geometry.

In practical setup terms the 2.0mm graphite deck raises torsional rigidity compared with thinner plates, which typically sharpens turn-in and reduces mid-corner compliance. Use it when you need a firmer chassis response for higher-grip surfaces or when balancing a softer lower deck and shock tune. Expect predictable, chassis-level changes rather than a bolt-on cure for handling problems.

Installation is straightforward for experienced model builders: the part replaces the original upper deck and uses existing fasteners and mounting locations on the A800MMX chassis. Check alignment at the bulkheads and verify that radio gear, ESC and servo clearances remain acceptable before final tightening.

Choose this deck when you need a durable graphite plate to stiffen an A800MMX chassis and refine handling on medium to high grip surfaces; verify fitment and clearance during installation to keep servo and electronics access unchanged.