Futaba 6EXAP_c5 6-Channel FM 35MHz Airplane & Helicopter Transmitter System  [6EXAP_c5]

Price:
USD$146.00
Brand:
Futaba
Model:
6EXAP_c5
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Compact 6-channel flight transmitter

The Futaba 6EXAP_c5 is an RC-scale 6-channel FM transmitter package aimed at pilots who fly airplanes and helicopters on 35MHz. The set centers on straightforward control mapping and physical switches that let you set dual rates, trims and function dials without deep menu diving, while including a receiver and standard servos to get an airframe flying quickly.

Controls are arranged for field use: an aileron/elevator dual-rate switch that also flips exponential settings, a dedicated flap control dial driving channel 6, a retractable landing gear switch on channel 5, and a throttle/rudder stick layout with a throttle-cut button for engine shutdown procedures. Trims are provided for every axis, and a DATA INPUT lever plus MODE and SELECT keys navigate the LCD for programming and checking values.

Installation is straightforward: mount the included R136F receiver in the airframe following manufacturer placement guidelines, plug the four S3003 servos into the required channels, route and fully extend the antenna for reliable signal transmission, and use the charging jack and supplied charger to prepare the transmitter battery before the first flight. The trainer switch supports instructor control when connected to a second transmitter via a trainer cord sold separately.

Specifications

  • Item Futaba 6EXAP 6-Channel FM transmitter set
  • Material Electronic components and molded transmitter case
  • Model Number 6EXAP_c5
  • Compatibility Airplane and helicopter RC models using 35MHz receivers, includes R136F
  • Channels 6 channels with dedicated controls for flaps (ch6), gear (ch5), throttle (ch3), rudder (ch4)
  • Includes R136F receiver, 4 pcs S3003 servos, transmitter battery charger
  • Display Liquid-crystal display for programming and values

For RC pilots who need a field-friendly six-channel FM setup, this Futaba bundle provides hard-switch control for dual rates and trims, channel-specific dials and the receiver/servo hardware to install and tune a sport or scale model quickly.

What is included in the package?

The set includes the Futaba 6EXAP_c5 transmitter, a Futaba R136F receiver, four S3003 servos, and the transmitter battery charger.

How do I use the dual-rate switch?

The dual-rate switch toggles between two throw settings for aileron, elevator and rudder; set the high-rate for more control authority and the low-rate for gentler responses, and it also swaps exponential values if programmed.

Which channel controls the flaps and landing gear?

The flap control dial operates the servo on channel 6, and the retractable landing gear switch controls the servo on channel 5.

How does the throttle-cut function work?

To use throttle-cut, lower the throttle stick fully, then press the throttle-cut button to close the carburetor for engine shutoff as described in the transmitter controls.

Can I use the trainer function with another transmitter?

Yes, the trainer switch works when the transmitter is connected to a second transmitter via a trainer cord, which is available separately.

Any notes on the antenna and charging?

Always fully extend the antenna during operation to avoid interference and reduced range, and use the charging jack with the supplied charger to prepare the transmitter battery before flying.

Copyright © 2008-2026 rcjaz.com All rights reserved