The GY520 Heading Hold Gyro + S9257 High Speed Digital Servo for Helicopter Gyro Operation produced by Futaba, is classified in R/C Models - System - Gyroscopes
Futaba GY520 Heading Hold Gyro + S9257 High Speed Digital Servo for Helicopter Gyro Operation.Futaba GY520 Heading Hold Gyro
QUALITIES:
Ultra small and lightweight gyro found in one unit-no separate sensor and control unit
Utilizes a top rate advanced level PID (Proportional-Integral-Derivative) control algorithm Latest MEMS (Micro-Electro-Mechanical Systems) permits complete control system using one chip
Delivers superior performance with analog servos and excels with electronic servos
F3C and 3D mode selectable, six programmable parameters
Functions at quite high speed; 280Hz in the 1520uS mode and 506Hz in the 760uS mode
Programmable through solitary button and multi-color LED or through a PC making use of Futaba
CIU-2 USB adapter
Registered AVCS (Angular Velocity Control System) architecture achieves unmatched end holding ability
Twelve months restricted warranty
INCLUDES: Futaba GY520 Heading Hold Gyro, instruction manual, one each 13" (330mm) lead with red connectors and lead with black connectors
two chapters of sensor tape, mini screwdriver and instructions
NEEDS: Digital or analog servos
SPECS: Size: 0.82 x 0.82 x 0.43" (20.8 x 20.8 x 11mm)
Voltage Range: 3.8 - 6.0V DC
Control System: Advanced PID control
Present Draw: 40mA (without servo)
Sensor: MEMS vibrating structure gyro
Operating Temperature: 14�XF - 113�XF (-10�XC - +45�XC)
Sensor speed Range: +/- 800�X sec
Angular Velocity Range: +- 800 deg/sec
Here is the Futaba S9257 High Speed Digital Servo for Helicopter Gyro process.
FEATURES:
To be used with the Futaba GY401 (FUTM0807, FUTM0808) therefore the GY502 gyros
Designed with two ball bearings
12 months restricted guarantee
INCLUDES:
Futaba S9257 Tall Speed Digital Servo with .83" (21mm) diameter circular horn, 1.5" (39mm) diameter four-point horn, 1.2" (32mm)
diameter six-point horn, mounting equipment, electronic servo
precaution sheet and guarantee card
REQUIRES:
Connecting to gyro
SPECS: Dimensions: 1.4 x 0.6 x 1.1" (36 x 15 x 29mm)
Weight: .92oz (26g)
Torque: 28 oz-in (2.0 kg-cm) at 4.8V
Operating Speed: 0.08 sec/60�X at 4.8V
Lead Length: 7.9" (200mm)
