Intellect IP-CC2S3800V3-35C - 7.4V 35C 3800mAh Li-Po race pack (hard case with pin)  [IP-CC2S3800V3-35C]

Intellect (IP-CC2S3800V3-35C) - 7.4V 35C 3800mah Lipo Battery
Price:
USD$35.50
Brand:
Intellect
Model:
IP-CC2S3800V3-35C
Write a review

Overview and fit

This Intellect IP-CC2S3800V3-35C 7.4V 3800mAh Li-Po race pack is built as a hard-case battery intended for on-road RC car race setups where a compact hard-case pack with pin-style connectors is required. The pack uses lithium polymer cells rated at 35C continuous discharge and is supplied with 4mm discharge pins and a 2mm balance pin connector, which makes it compatible with race electronics and chargers that accept those connector types.

For installation, check your chassis’ battery tray clearance against the pack dimensions and confirm your connector types before mounting. The hard case keeps the pack stable under tie-downs used in competitive setups; ensure the balance lead routing clears moving parts. When replacing a pack, match voltage and capacity range to your ESC and motor tuning goals rather than only physical size.

In tuning contexts, capacity and discharge rating affect runtime and voltage sag under load: at 3800mAh the pack provides a balance between endurance and weight for sprint and short main formats, and the 35C rating gives a predictable voltage drop profile for tuning gearing and ESC timing. Always balance-charge with a charger that supports 2S LiPo profiles and the 2mm balance connector provided.

Specifications

  • Item: Li-Po race pack (hard case with pin)
  • Material: Lithium Polymers
  • Model Number: IP-CC2S3800V3-35C
  • Voltage: 7.4V
  • Capacity: 3800mAh
  • Discharge Rating: 35C
  • Connector Discharge: 4mm pin
  • Connector Balance: 2mm pin
  • Pack Dimension: 137.8 x 46.8 x 23.3 mm
  • Color: Black

This pack is suitable for racers seeking a hard-case 2S LiPo with mid-range capacity and a 35C discharge rating; confirm physical fit and connector compatibility with your chassis and charging equipment before use.

Yes, use a charger that supports 2S LiPo chemistry and connect the 2mm balance pin to the charger’s matching balance lead or adapter.
The 35C rating indicates the continuous discharge capability relative to capacity and helps predict voltage sag under load; it is suitable for typical on-road race power demands at this capacity.
The pack is supplied with 4mm discharge pins and a 2mm balance pin connector; confirm your vehicle’s lead style and use appropriate adapters or rework only if you have correct soldering tools and experience.
Store at a partial charge around 3.8–3.9V per cell in a cool, dry place, and use a LiPo storage mode on your charger if available; avoid fully charged or fully discharged storage for long periods.

Copyright © 2008-2026 rcjaz.com All rights reserved