The G-Zero Shinning Red R/S produced by Kyosho Drone Racer series, is classified in R/C Models - Flight - Racing Drones
DRONE RACER glides above the ground with pistol-grip transmitter control. The Storyline associated with the Drone Race:
Kyosho’s Drone Racer is great.
A team of 3 previous mischievous males are now around forty yrs . old and senior. They have grown to the males they once seemed up to as kiddies, packed with work and home duties. They work late; get caught up within the hustle of town life, and keep otherwise normal healthier lifestyles. Fast forward toward dawn for the Saturday which they'll get together again the very first time in ages. Planning their Drone Racers and loading the vehicle along with other gear (program), then GO!
The New Generation, Drone Racer glides over the ground.
Unlike existing drones which can be hard to get a grip on, the sensational DRONE RACER is managed like an R/C vehicle with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control making use of ultrasonic sensors that remove the frustration of learning complicated traveling techniques. Now you can experience the fun of drone flying at your rate.
Control with a pistol-grip R/C system, The KT-231P+ Transmitter
This Readyset includes everything you need. Open the package then charge the battery pack to begin flying.
Includes the newest 2.4GHz Syncro KT-231P pistol-grip transmitter featuring advanced level aircraft-like tool panel. Flying height adjustment switch is set up on root of the transmitter hold.
Battery : 3.7V-1000mAh Li-Po battery pack, Flight time /10 mins approx.
USB Charger : Includes USB auto-cut charger. Charging time / 1-2 hours, (depending on USB power supply output)
USB Cable : Includes USB cable to get in touch the drone to a personal computer.
Brand new Technology: Dogfight only 35cm above the ground. Rates throughout the ground similar to a Hoverboard. Newly developed drone technology.
The DRONE RACER has advanced level ultrasonic sensors,
6-axis gyroscope (3-axis angle speed sensors, 3-axis acceleration sensors),
barometric pressure sensor and four fast reaction mini coreless motors.
Rate switching function provides a selection between “Easy Mode” and “Active Mode” and
provides direct intuitive journey control.
minimal HEIGHT FLYING CONTROL
Altitude is immediately maintained with ultrasonic and barometric force sensors. Altitude environment of 35cm or 60cm are chosen with a switch on R/C system and one-touch control can be used for takeoff, hovering and landing. Many people may feel frustrated in learning drone flying techniques.Kyosho’s newly developed technology*(patent pending) eliminates these obstacles therefore anyone can enjoy the enjoyable of traveling drones. *according to Kyosho research
Flies over any area, also over water. Keeps constant altitude of 13 ins (23 inches) using ultrasonic sensors.
All Terrain: Grass/Ground/Water/Mud/Snow
VPUS, VARIABLE PROPELLER DEVICE STRUCTURE
H-type chassis with separate top and lower sections and left-right propellers linked on one propeller arm permit the propeller device angle become changed between: 0°, 10°, 20°. Make use of more stability (0°/ max speed : 30km/h) or even more speed (20°/ max speed : 34.5km/h) as a racing weapon.Includes Arm holder 0°,10°,20°.
KYOSHO DRONE CONTROL MIXING SYSTEM
Optimal roll and yaw mixing match control from the tyre.
K-DCMS, Kyosho Drone Control Mixing System
DRONE BACKWARD CONTROL
Uses comparable control movement as a car.
Brand new Drone Safty,Kyosho DRONE RACER is not at the mercy of the revised Japanese aviation legislation. This system are enjoyed by anyone.
The DRONE RACER isn't made for high altitude performance, but for individuals to savor traveling properly inside their industry of eyesight near the ground. A complete security system includes: detachable propeller guards; “PROPELLER AUTO AVOID SYSTEM” that activates just in case you lose control associated with the throttle; “ANGLE EMERGENCY CAR STOP SYSTEM” in the event that drone becomes inverted, and “RADIO CUT CRISIS CAR STOP SYSTEM” whenever radio stations signal is lost. Weighing just 130g, the DRONE RACER just isn't at the mercy of japan aviation legislation so that you can fly freely anywhere you like (except in limited areas). *as at aviation laws tenth December 2015
Fast, breathtaking and much more powerful. Sophisticated masterworks.
Model lineup features two human body style designs, the G-ZERO and ZEPHYR,
which are based on a futuristic impression of automobile aided by the slim form and
rear wings related to formula racing vehicles.
Bright LEDs light the fuselage. LEDs may be used as drone identifiers whenever race.
Full color LED installed on front side propeller devices permits a selection from 6 colors. You can choose your favorite luminescent color to utilize as an identifier when racing.
Red : flashing suggests low battery caution, when lit shows security function is released & can run as tail lamp
Yellow : transmitter not connected = RADIO EMERGENCY AVOID
Green: blinking indicates detecting horizontal, when lit indicates prepared to takeoff and security function is triggered
Blue : gyro calibration happening
2 x LED on front and 1 x LED on backside set up
For effortless front-rear identification the leading mask features 2 bright white LEDs plus the end features red LED.
Infrared LED set up in the cockpit works with a particular lap counter.
Additional features consist of: pairing button; Light-emitting Diode color modification; calibration modification;setting mode changing button;5V outside power slot; extended LED port, and micro USB terminal.
Includes pair of extra propellers (4). Never hesitate to fully benefit from the fun of traveling!
Endless Opportunities
DRONE RACER SETTING MANAGER
DRONE RACER can hook up to your (Windows) computer aided by the included USB cable to adjust trip settings. Furthermore, an optional cable can also be used to connect to an Android terminal with a USB host function to modify settings.
Download the free (DRONE RACER SETTING MANAGER) adjust fully to your favorite environment and generate the quantity of enjoyable.
Required for Operation (Available Separately)
- 4 x AA size batteries for transmitter
- Computer with USB port (for recharging) or USB power charger (if production is above 2A, full cost are complete within 60 minutes)
Specs:
- Length: 302mm (with guard)
- Width: 300mm (with guard)
- Height: 65mm
- Gear Ratio: 5 : 1
- Body weight: 130g approx.
- Engine: 8.5mm coreless
- Battery: 3.7V-1000mAh
- Propeller: D5 x P4
- Flight Time: 10 min approx.
- recharging Time: 1-2 hours (dependent on USB energy production)
- 30km/h approx. (normal specification)/34.5km/h approx. (with 20° propeller angle establishing)/38km/h approx. (when working with optional parts)
- Energy thickness: 318Wh/L (perhaps not subjected PSE)
- Journey altitude: minimal 35cm/High 60cm approx. (setting is changed making use of software application)
