The G-ZERO Dynamic White Radio Control produced by Kyosho Drone Racer series, is classified in R/C Models - Flight - Racing Drones
Kyosho 20571W - 1/18 G-ZERO Dynamic White Readyset Radio Control Drone Racer The Storyline of this Drone Race:
Kyosho’s Drone Racer is great.
A group of 3 former mischievous men are now around forty years of age and senior. They've grown into the men they when looked up to as children, filled with work and home duties. It works late; get caught up inside hustle of town life, and keep otherwise normal healthy lifestyles. Fast ahead towards the dawn of Saturday where they'll get together again for the first time in many years. Preparing their Drone Racers and loading the vehicle along with other gear (course), and then GO!
The newest Generation, Drone Racer glides over the ground.
Unlike current drones being difficult to get a grip on, the sensational DRONE RACER is controlled like an R/C car with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control making use of ultrasonic sensors that take away the frustration of learning complicated flying methods. You can now experience the fun of drone traveling at your own personal speed.
Control with a pistol-grip R/C system, The KT-231P+ Transmitter
This Readyset includes everything required. Open the package then charge the battery pack to start traveling.
Includes the most recent 2.4GHz Syncro KT-231P pistol-grip transmitter featuring advanced level aircraft-like instrument panel. Flying height modification switch is set up regarding the base of the transmitter hold.
Battery : 3.7V-1000mAh Li-Po battery pack, Flight time /10 moments approx.
USB Charger : Includes USB auto-cut charger. Charging time / 1-2 hours, (based on USB power supply output)
USB Cable : Includes USB cable to get in touch the drone to an individual computer.
Brand new tech: Dogfight just 35cm over the ground. Rates over the ground just like a Hoverboard. Newly developed drone technology.
The DRONE RACER comes with higher level ultrasonic sensors,
6-axis gyroscope (3-axis angle rate sensors, 3-axis acceleration sensors),
barometric pressure sensor and four quick reaction mini coreless engines.
Rate switching function provides an option between “Easy Mode” and “Active Mode” and
provides direct intuitive journey control.
minimal HEIGHT FLYING CONTROL
Altitude is automatically maintained with ultrasonic and barometric pressure sensors. Altitude environment of 35cm or 60cm could be chosen with a switch on the R/C system and one-touch control is used for takeoff, hovering and landing. Some people may feel frustrated in learning drone traveling techniques.Kyosho’s newly developed technology*(patent pending) eliminates these obstacles so somebody can enjoy the fun of flying drones. *according to Kyosho research
Flies over any surface, also over water. Maintains constant altitude of 13 ins (23 inches) utilizing ultrasonic sensors.
All Terrain: Grass/Ground/Water/Mud/Snow
VPUS, VARIABLE PROPELLER DEVICE STRUCTURE
H-type framework with separate upper and lower parts and left-right propellers linked using one propeller arm enable the propeller device angle to be changed between: 0°, 10°, 20°. Use more stability (0°/ max speed : 30km/h) or even more rate (20°/ max speed : 34.5km/h) as a racing weapon.Includes Arm owner 0°,10°,20°.
KYOSHO DRONE CONTROL MIXING SYSTEM
Optimal roll and yaw mixing match control from controls.
K-DCMS, Kyosho Drone Control Mixing System
DRONE BACKWARD CONTROL
Uses comparable control motion as a motor vehicle.
Brand new Drone Safty,Kyosho DRONE RACER just isn't susceptible to the revised Japanese aviation law. This product are enjoyed by anyone.
The DRONE RACER is not created for thin air performance, however for individuals to savor flying safely inside their industry of eyesight nearby the ground. A complete safety system includes: removable propeller guards; “PROPELLER AUTO STOP SYSTEM” that activates if you lose control associated with the throttle; “ANGLE EMERGENCY AUTO STOP SYSTEM” if the drone becomes inverted, and “RADIO CUT EMERGENCY CAR AVOID SYSTEM” in case radio stations signal is lost. Weighing just 130g, the DRONE RACER isn't subject to japan aviation legislation and that means you can travel easily anywhere you like (except in limited areas). *as at aviation regulations tenth December 2015
Fast, gorgeous and much more powerful. Sophisticated masterworks.
Model lineup features two human body design designs, the G-ZERO and ZEPHYR,
that are considering a futuristic impression of vehicle with all the slim type and
back wings connected with formula racing cars.
Bright LEDs light up the fuselage. LEDs can be utilized as drone identifiers when racing.
Color LED installed on front side propeller units enables a variety from 6 colors. You'll choose your favorite luminescent color to utilize as an identifier when race.
Red : blinking shows low battery pack warning, whenever lit suggests safety function is released & can run as tail lamp
Yellow : transmitter maybe not linked = RADIO CRISIS STOP
Green: flashing suggests detecting horizontal, whenever lit shows willing to takeoff and safety function is activated
Blue : gyro calibration in progress
2 x LED on front and 1 x LED on back installed
For easy front-rear recognition the front mask features 2 white colored LEDs plus the tail features red LED.
Infrared LED set up within the cockpit works with a particular lap counter.
Additional features consist of: pairing button; LED color modification; calibration correction;setting mode changing button;5V outside power port; extended Light-emitting Diode port, and micro USB terminal.
Includes group of spare propellers (4). Usually do not wait to completely benefit from the fun of traveling!
Infinite Opportunities
DRONE RACER SETTING MANAGER
DRONE RACER can connect to your (Windows) computer using the included USB cable to adjust journey settings. In addition, an optional cable can also be used to hook up to an Android terminal with a USB host function to adjust settings.
Download the free (DRONE RACER SETTING MANAGER) adjust fully to your chosen setting and generate the amount of fun.
Necessary for Operation (Available Separately)
- 4 x AA size batteries for transmitter
- Computer with USB port (for recharging) or USB energy charger (if production is significantly more than 2A, complete fee may be complete within one hour)
Specs:
- Length: 302mm (with guard)
- Width: 300mm (with guard)
- Height: 65mm
- Gear Ratio: 5 : 1
- Body weight: 130g approx.
- Engine: 8.5mm coreless
- Battery: 3.7V-1000mAh
- Propeller: D5 x P4
- Flight Time: 10 min approx.
- recharging Time: 1-2 hours (according to USB energy output)
- 30km/h approx. (normal specification)/34.5km/h approx. (with 20° propeller angle setting)/38km/h approx. (when utilizing optional parts)
- Energy density: 318Wh/L (maybe not subjected PSE)
- Flight altitude: Low 35cm/High 60cm approx. (setting is changed utilizing software program)
