The Zephyr Smashing Yellow R/S produced by Kyosho Drone Racer series, is classified in R/C Models - Flight - Racing Drones
Ultra-Low altitude. Take on a new challenge The Storyline associated with Drone Race:
Kyosho’s Drone Racer is fantastic.
A small grouping of 3 former mischievous guys are actually around forty yrs . old and senior. They've grown into the men they as soon as seemed around as kids, high in work and home duties. They work late; get trapped inside hustle of town life, and continue maintaining otherwise normal healthy lifestyles. Fast ahead towards the dawn regarding the Saturday where they will get back together for the first time in many years. Preparing their Drone Racers and loading the vehicle with other equipment (course), after which GO!
The latest Generation, Drone Racer glides above the ground.
Unlike existing drones being hard to get a handle on, the sensational DRONE RACER is controlled like an R/C automobile with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control utilizing ultrasonic sensors that eliminate the frustration of learning complicated traveling strategies. You can now experience the enjoyable of drone traveling at yours speed.
Control with a pistol-grip R/C system, The KT-231P+ Transmitter
This Readyset includes everything required. Start the package then charge the battery pack to start traveling.
Includes the most recent 2.4GHz Syncro KT-231P pistol-grip transmitter featuring advanced aircraft-like instrument panel. Flying height modification switch is set up on the root of the transmitter grip.
Battery : 3.7V-1000mAh Li-Po battery pack, Flight time /10 moments approx.
USB Charger : Includes USB auto-cut charger. Charging time / 1-2 hours, (depending on USB power production)
USB Cable : Includes USB cable to connect the drone to your own computer.
Brand new Technology: Dogfight just 35cm over the ground. Rates on the ground like a Hoverboard. Newly developed drone technology.
The DRONE RACER has higher level ultrasonic sensors,
6-axis gyroscope (3-axis angle speed sensors, 3-axis acceleration sensors),
barometric force sensor and four fast reaction mini coreless engines.
Speed switching function provides a selection between “Easy Mode” and “Active Mode” and
provides direct intuitive trip control.
LOW HEIGHT FLYING CONTROL
Altitude is immediately maintained with ultrasonic and barometric stress sensors. Altitude environment of 35cm or 60cm are selected with a switch in the R/C system and one-touch control is used for takeoff, hovering and landing. Some people may feel frustrated in learning drone traveling techniques.Kyosho’s newly developed technology*(patent pending) removes these barriers so anyone will enjoy the enjoyable of traveling drones. *according to Kyosho research
Flies over any area, also over water. Keeps constant altitude of 13 inches (23 inches) using ultrasonic sensors.
All Terrain: Grass/Ground/Water/Mud/Snow
VPUS, VARIABLE PROPELLER UNIT CONSTRUCTION
H-type framework with split top and lower parts and left-right propellers connected on a single propeller arm enable the propeller device angle become changed between: 0°, 10°, 20°. Make use of more stability (0°/ max speed : 30km/h) or maybe more speed (20°/ maximum speed : 34.5km/h) as a racing weapon.Includes Arm owner 0°,10°,20°.
KYOSHO DRONE CONTROL MIXING SYSTEM
Optimal roll and yaw blending match control from the tyre.
K-DCMS, Kyosho Drone Control Mixing System
DRONE BACKWARD CONTROL
Uses similar control motion as a car or truck.
New Drone Safty,Kyosho DRONE RACER just isn't subject to the revised Japanese aviation law. This product are enjoyed by anybody.
The DRONE RACER isn't designed for high altitude performance, but for people to savor traveling properly of their industry of eyesight nearby the ground. A complete safety system includes: detachable propeller guards; “PROPELLER AUTO AVOID SYSTEM” that activates in the event you lose control regarding the throttle; “ANGLE CRISIS AUTO AVOID SYSTEM” if the drone becomes inverted, and “RADIO CUT EMERGENCY AUTO STOP SYSTEM” in the event radio stations signal is lost. Weighing only 130g, the DRONE RACER isn't susceptible to japan aviation law and that means you can travel easily anywhere you want (except in restricted areas). *as at aviation laws tenth December 2015
Fast, gorgeous and much more powerful. Advanced masterworks.
Model lineup features two body design designs, the G-ZERO and ZEPHYR,
that are based on a futuristic impression of car aided by the narrow form and
rear wings connected with formula rushing automobiles.
Bright LEDs light the fuselage. LEDs can be used as drone identifiers whenever race.
Full color LED set up on front side propeller units enables a selection from 6 colors. It is possible to choose your favorite luminescent color to make use of as an identifier when racing.
Red : blinking suggests low battery pack warning, whenever lit indicates security function is released & can operate as tail lamp
Yellow : transmitter perhaps not connected = BROADCAST EMERGENCY STOP
Green: flashing indicates detecting horizontal, when lit suggests willing to takeoff and safety function is activated
Blue : gyro calibration in progress
2 x LED on front and 1 x LED on rear installed
For effortless front-rear identification the front mask features 2 white LEDs and the end features red LED.
Infrared LED set up within the cockpit works with a unique lap counter.
Additional features include: pairing button; LED color change; calibration modification;setting mode changing key;5V outside power slot; extended LED port, and micro USB terminal.
Includes group of spare propellers (4). Do not wait to fully take pleasure in the fun of traveling!
Endless Opportunities
DRONE RACER SETTING MANAGER
DRONE RACER can connect to your (Windows) computer using the included USB cable to modify journey settings. Besides, an optional cable can also be used to hook up to an Android terminal with a USB host function to regulate settings.
Download the free (DRONE RACER SETTING MANAGER) to fully adjust to your favorite environment and generate the amount of fun.
Required for Process (Sold Individually)
- 4 x AA size batteries for transmitter
- Computer with USB slot (for billing) or USB power charger (if output is a lot more than 2A, full fee can be complete within 60 minutes)
Specs:
- Length: 302mm (with guard)
- Width: 300mm (with guard)
- Height: 65mm
- Gear Ratio: 5 : 1
- Body weight: 130g approx.
- Engine: 8.5mm coreless
- Battery: 3.7V-1000mAh
- Propeller: D5 x P4
- Trip Time: 10 min approx.
- recharging Time: 1-2 hours (dependent on USB power output)
- 30km/h approx. (normal specification)/34.5km/h approx. (with 20° propeller angle establishing)/38km/h approx. (when utilizing optional components)
- Energy thickness: 318Wh/L (not subjected PSE)
- Journey altitude: minimal 35cm/High 60cm approx. (setting may be changed utilizing software application)
