Kyosho 30973T2 - 1/7 EP 2WD Buggy SCORPION XXL VE readyset Color Type 2 (Black)  [30973T2]

Menacing looks and gratification to match!
Looks BAD, runs good! Easy to run, tough on the competition!

The brand new Kyosho Scorpion XXL combines the dynamic off road performance craved by off-road racers with simple drivability of a XXL scale off-road device. The sluggish, typically sluggish reaction of present big scale models make it more challenging to find suitable places to race them. Kyosho produces a whole new and exciting reality for large scale fans, delivering a machine that's somewhat scaled-down, but features the explosive performance and lightning-quick reactions of a finely-tuned rushing machine. New chassis design! The 3mm primary chassis features a molded "perimeter" frame that leads to rock-solid rigidity. In addition to providing superior suspension system travel, the reduced shock mounting position of the front "gull" arms keeps the shocks as low as easy for optimum cornering speeds and exceptional security throughout the roughest areas. This is complimented by a contemporary rear suspension typical of 1/10-scale cars, strengthened to produce a robust suspension system for this big device. The front suspension and steering geometry bring about superior large-scale managing like no time before.

• The receiver box is simply the right size the compact KR200 receiver. The mounting place can be far as you possibly can from electronic devices to lessen prospective disturbance.
• Features hex kind screws for safe assembly and razor-sharp looks too.
• The molded front and back surprise towers feature ultra rigid construction for accuracy performance, while allowing adequate flex to increase durability.
• Molded roll club and roof can be installed with dummy fog lights. Roll club is pre-installed regarding the Readyset.
• Includes a wing mount which allows installing the trunk wing from Inferno MP9 (optional). Slight modification to wing is required.

ReadySet articles

• Factory assembled chassis with 2-channel, 1-servo, 1-ESC R/C product
• Syncro KT-201 transmitter
• Pre-painted human anatomy
• Pre-installed Team Orion VORTEX 7 brushless engine
• Pre-installed Team Orion VORTEX VE-XXL ESC
• Cross wrench

Needed for Operation

• Battery for chassis/ 7.2-14.4V Li-Po battery with super plug connector
• Battery charger
• 4 x AA-size alkaline batteries for transmitter

Chassis Technical Data

• Length 630mm
• Width 402mm
• Height 244mm
• Wheelbase 452mm
• Tread (F/R) 353 / 331mm
• Tire(F/R) F130×43mm / F140×71mm
• Gear Ratio 16.0:1
• Weight 4000g(with human anatomy)
• Motor Orion Vortex 7 brushless