Kyosho 31275 - 1/8 Inferno MP 7.5 / MP-7.5 / MP7.5 Sports RTR (ReadySet)  [KYO-31275]

Kyosho 31275 - 1/8 Inferno MP 7.5 / MP-7.5 / MP7.5 Sports RTR (ReadySet)
Price:
USD$0.00
Brand:
Kyosho
Model:
KYO-31275
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - Off-Road - Buggy - Nitro Powered category
Write a review
The 7.5 / MP-7.5 / MP7.5 Sports produced by Kyosho in 1/8 scale AWD drivetrain RTR (Ready-to-Run), is classified in R/C Models - Off-Road - Buggy - Nitro Powered

Kyosho (#31275) - Kyosho 1/8 Inferno MP-7.5 Sports RTR (ReadySet)

Here is the Kyosho Inferno MP7.5 Sports 1/8 Readyset nitro driven ready-to-run off road buggy with radio.
That is based on the championship winning MP7.5 Chassis and comes pre-assembled utilizing the Kyosho GX21 engine with pull-start.
Compatible with MP7.5 and Kanai Edition II hop ups.


FEATURES:

Chassis: 3mm aluminum primary framework and aluminum upper deck
Drive: Four wheel drive
Drive Type: Shaft driven
Radio: 2 channel AM pistol hold Kyosho Perfex with high torque steering servo, trims and servo reverse (made by Futaba similar to the Futaba 2PH)
Engine: Kyosho GX21 with pull start and slide valve carburetor
Exhaust: Tuned pipe with header
Fuel Tank: 125cc (4.2oz) flip top cap
Clutch: 2-Shoe
Transmission: Single-speed
Ball Bearing: complete set included, 18 total
Shocks: 4 oil-filled, blue aluminum with coil-over spring
Main Gear: vinyl 46T
Gearbox: Sealed, both front and rear
Differential: Planetary geared, w/ring and pinion
Brakes: Twin double disk
Tires: 3.2" buggy action pin, moderate ingredient rubber
tires: 1-Piece, 10-spoke, buggy type
Body: definitely detailed painted off road buggy human anatomy
Bumpers: Front only
Suspension: Front and rear separate double wishbone
Camber Tie Rods: Adjustable
Steering Tie Rods: Adjustable
Steering: Bell-Crank
Servo Saver: Included
Warranty Period: ninety days

INCLUDES:

Inferno MP7.5 Sports rolling chassis with aluminum shocks, GX21 motor, radiance plug, painted lexan human anatomy, tires, 48 enamel spur gear, 10-Spoke Wheels, Wing, 13 Tooth Clutch Bell, guidelines, decal set

NEEDS:

Broadcast Batteries: Twelve AA size
Glow Starter: 1.2 volt
Misc. Things: gas container, building and track equipment
Fuel: 2-cycle radiance gas with 10%-15percent nitromethane, 18per cent lubricant-
Most regarding the fuels we carry fulfill or exceed the lubricant content
required for optimum performance and optimum engine life. In the
past, the standard lubricant content utilized in fuel ended up being 18percent. But
with brand new higher level technologies, fuels like Red Alert and O'Donnell
for instance, have a better quality of lubricants even though the
percentages of lubricant content are reduced. These high-tech
lubricants provide exceptional cooling and security.

SPECS:

Vehicle-
Length: 19.5" (495mm)
Width: 12" (305mm)
Height: 7.4" (188mm)
Weight: 7.1lbs (3220g)
Wheelbase: 12.9" (328mm)
Front Track: 10.2" (258mm)
Rear Track: 10.2" (258mm)
Ground approval: 1.1" (28mm)
Gear Ratio: 11.7 :1
Tires- front side: 1.7" x 4.6" (42x116mm)
back: 1.7" x 4.6" (42x116mm)
Body-
Length: 15-1/2" (393mm)
Width: 8-1/2" (215mm)
Height: 4-1/4" (107mm)

Steering servo:
Speed: .20 sec/60 deg. @ 4.8V and .16 sec/60 deg. @ 6.0V
Torque: 72 oz/in @ 4.8V and 90 oz/in @ 6V
5.2 kg/cm @ 4.8V and 6.5 kg/cm @ 6V

OPINIONS: If utilising the GS-21R you will need (Flywheel).
The stock GX-21R flywheel will not work with the GS-21R.
For Replacement Ball Bearings use:
Qty. Size
(18) 8 x 16mm

Copyright © 2008-2024 rcjaz.com All rights reserved