Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set  [KY32522GM]

Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set

Price:

USD$240.00

Brand:
Kyosho
Model:
KY32522GM
GTIN:
4548565380053
Condition:
Brand New
alt="Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set" title="Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set"
alt="Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set" title="Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set"
alt="Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set" title="Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set"
alt="Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set" title="Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set"
alt="Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set" title="Kyosho 32522GM - Mini-Z 4X4 Toyota 4 Runner (HiLux Surf) Dark Metallic Grey Ready Set"
Write a review
The Mini-Z 4X4 Toyota 4 Runner HiLux Surf Dark Metallic Grey produced by Kyosho in 1/18 scale 4x4 Crawler series RTR (Ready-to-Run), is classified in R/C Models - On-Road - Mini-Z

The mixture of this highly-detailed human anatomy and a totally brand new 4x4 chassis design starts up new degrees of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.

In 2019 the planet's preferred mini RC series, referred to as Kyosho MINI-Z, celebrated above two decades of unmatched performance and scale realism inside hobby-grade RC category. The continuous pursuit of performance and evolution has resulted in the creation of a completely-new ‘MINI-Z 4x4’ design that provides an all-new driving experience for RC fans of all stripes, with superior overall design, driving performance and top-quality injection-molded scale body construction. An important feature of the MINI-Z 4x4 series may be the greater focus of body information and quality of finish that even surpasses current benchmarks set by the MINI-Z. Your body normally molded with thicker material to raised resist crash harm from procedure in rough terrain. Incorporating equivalent ladder- style framework of real 4WD cars, the MINI-Z 4x4 boasts a 3-link rigid axle suspension system combining just what would usually be two top links into an individual top A-arm to supply maximum suspension motion. A specially created high-torque steering servo allows this device to put its elbows around into the difficult landscapes for excellent performance within the most challenging rock-crawler conditions. The high-torque 130-size motor brings out the beast inside MINI-Z 4x4, particularly geared to run well within the low to medium rate ranges typical in crawling.


Designed to balance exquisite style, scale detail and superior driving performance, all the MINI-Z 4x4 needs is 8 x AAA alkaline batteries (sold individually). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the stunning visual look. The Kyosho Mini-Z 4x4 is the only mini crawler that provides a full array of crawling performance in an inferior package


TECHNICAL INFORMATION

  • Length 200.5mm
  • Width 87mm
  • eight 86.0mm
  • Chassis Type MX-01
  • Wheel Base 110mm
  • Tread F/R:72.7mm
  • Weight 223g (excl. battery)
  • Motor/Engine 130 Class
  • Gear Ratio 55.44:1/30.80:1/46.20:1
  • 27.72:1/39.60:1/34.65:1
  • Front Tire Diameter Φ42.0mm
  • Rear Tire Diameter Φ42.0mm
  • Front Tire Width 14.3mm
  • Rear Tire Width 14.3mm
  • Battery 4 x AAA alkaline
  • Transmitter Syncro KT-531P
  • Speed Approx. 3.3km/h6.6km/h (Pinion gears 10T 20T)
  • operating Time Approx. 60 mins

  • KIT CONTENTS

  • Complete framework with built-in electronic devices.
  • Factory-painted human anatomy detailed with many fine details
  • KT-531P 2.4GHz transmitter
  • Pinion gear set(10T12T14T16T18T20T)
  • 3 forms of pinion gear spacers

  • REQUIRED FOR OPERATION

  • 4 x AAA batteries for the transmitter
  • 4 x AAA batteries for chassis (Alkaline or NiMH)
  • Copyright © 2008-2021 rcjaz.com All rights reserved