Kyosho 32527GR - Radio Controlled Electric Powered Crawling car MINI-Z 4x4 Series Ready Set Land Rover Defender 90 Heritage Grasmere Green / Alaska White  [KY-32527GR]

In 2019 the planet's hottest mini RC series, known as the Kyosho MINI-Z, celebrated above twenty years of unmatched performance and scale realism inside hobby-grade RC category. The continuous quest for performance and evolution has generated the creation of a completely-new ‘MINI-Z 4x4’ design that provides an all-new driving experience for RC fans of all stripes, with superior overall design, driving performance and top-notch injection-molded scale human body construction. A substantial feature for the MINI-Z 4x4 series is the greater emphasis of human anatomy information and quality of finish that even surpasses existing benchmarks set by the MINI-Z. Your body is also molded with thicker material to better resist crash damage from procedure in rough landscapes. Integrating equivalent ladder- design framework of real 4WD cars, the MINI-Z 4x4 boasts a 3-link rigid axle suspension combining what would generally be two upper links into just one upper A-arm to deliver maximum suspension movement. A specially designed high-torque steering servo enables this machine to put its elbows around within the difficult landscapes for exceptional performance in toughest rock-crawler conditions. The high-torque 130-size engine brings about the beast in the MINI-Z 4x4, specially targeted at run well within the low to moderate rate ranges typical in crawling.

made to balance exquisite style, scale detail and superior driving performance, all of the MINI-Z 4x4 needs is 8 x AAA alkaline batteries (sold separately). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the beautiful visual look. The Kyosho Mini-Z 4x4 may be the only mini crawler that provides a full array of crawling performance in an inferior package.

TECHNICAL DATA

• Length 185.8mm
• Width 83mm
• eight 104.0mm
• Chassis Type MX-01
• Wheel Base 110mm
• Tread F/R:72.7mm
• Weight 238g (excl. battery)
• Motor/Engine 130 Class
• Gear Ratio 55.44:1/46.20:1/39.60:1
• 34.65:1/30.80:1/27.72:1
• Front Tire Diameter 42.0mm
• Rear Tire Diameter 42.0mm
• Front Tire Width 14.3mm
• Rear Tire Width 14.3mm
• Battery 4 x AAA alkaline
• Transmitter Syncro KT-531P
• Speed Approx. 3.3km/h6.6km/h (Pinion gears 10T 20T)
• Running Time Approx. 60 minutes

KIT CONTENT

• Complete framework with integrated electronic devices.
• Factory-painted human body complete with numerous fine details
• KT-531P 2.4GHz transmitter
• Pinion gear set(10T12T14T16T18T20T)
• 3 kinds of pinion gear spacers

REQUIREMENT TO OPERATE

• 4 x AAA batteries the transmitter
• 4 x AAA batteries for framework (Alkaline or NiMH)