The MINI-Z AWD NISSAN SKYLINE GT-R R34 V.specIIN produced by Kyosho in 1/27 scale MA-020 series RTR (Ready-to-Run), is classified in R/C Models - On-Road - Mini-Z
To create its powerful performance to more drivers, the MINI-Z AWD happens to be for sale in a Readyset. The MA-020 chassis features VCS (variable camber suspension system) on front side that optimizes camber change with suspension system stroke and a specially designed circuit board. The framework design enables area for setting up the optional gyro unit(offered individually). The gyro can be adjusted by turning a tiny volume on framework to mirror the amount of steering correction responding to changes in framework position, allowing novices to professionals to drive to their complete potential. Completely fitted down with precision ball bearings, the high drive efficiency for the MA-020 framework is complimented into the Readyset by the initial scale human body and 2.4GHz Syncro KT-531P R/C system that will require no frequency musical organization setting; all at a good value cost. Merely set the batteries to take pleasure from the excitement of drift driving using the included set of drift tires. The chassis works with almost all ASC MINI-Z figures (additional components perhaps needed for someone styles). The MINI-Z AWD promises a distinctive world of dramatic race action for you to experience and revel in.
●MINI-Z AWD Readyset considering MA-020 framework.
●Special circuit board updated with optimized steering control system.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are set up as standard.
●Readyset requires just batteries to be ready to use it!
●Features 2.4GHz Syncro KT-531P transmitter that needs no setup of frequency bands.
●Factory completed body includes display model quality finish.
●Features VCS (variable camber suspension system) that adjusts camber prior to suspension system swing.
●Coil springtime on front suspension can be easily changed without tools.
●wide selection of optional parts can be obtained become installed.
●Note) Optional ICS cannot be used. Additionally, this model is specially created for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It's only appropriate for the unique gyro unit (sold separately).
Nissan Skyline GT-R V.SpecⅡ Nür (R34)
The last in Skyline GT-R series, the V. Spec II Nür is Nissan’s final R34. To commemorate the Skyline GT-R, this limited-edition is equipped with a racing-based tuned motor.
Includes trendy design of Syncro KT-531P transmitter. Features steering / throttle trim plus twin rate modification of steering angle and control the flashing rate of optional LEDs. In addition, the transmitter has a Training Mode function which limits rate regarding the vehicle for simple learning (default setting during the time of shipment is knowledge Mode).
Special AWD Sports chassis is dependant on the MA-02 chassis and features the RA45 unit.
Features VCS front suspension system that optimizes camber improvement in concert with suspension system swing. Replacement of front suspension coil springs is not hard without any tools needed.
Equipped with strut-type back suspension system.
Complete bearing specifications consist of 14 ball bearings.
Equipped with drift tires as standard.
Equipped with special mount room and gyro adjustment volume the optional gyro product (offered individually:Click right here for gyro help).
TECHNICAL DATA
- Length 167.0mm
- Width 70.0mm
- Height 52.0mm
- Wheelbase 98.0mm(LL)
- Tread F : 59.5mm R : 59.5mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx8.5mm
- Gear ratio 7.236.385.715.975.344.974.5:1
- Front Wheel Offset Narrow +1.5mm
- Rear Wheel Offset Narrow +1.5mm
- R/C System Syncro KT-531P
- Weight 193g
KIT CONTENT
- R / C product integral complete chassis
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- free nut
- Wheel wrench
- Pinion elimination tool
REQUIREMENT TO PERFORM
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter
