Kyosho 36112 2.0mm Hex Driver for 1/10 Truck Series  [KY-36112]

Compact 2.0mm hex driver tuned for RC truck maintenance

A straightforward 2.0mm hex driver intended for RC-scale use on 1/10 truck-series models. The slim 2.0mm tip matches the hex screws commonly used in suspension linkages, servo mounts, and accessory brackets on scaled trucks. It serves as a basic hand tool for routine assembly, periodic maintenance, and setup adjustments where a precise small hex tip is required.

Practical use and setup context

• Use for tightening and loosening 2.0mm hex screws in chassis assemblies and body mounts.
• Useful during pre-run checks: verify tightness on steering linkages, shock mounts, and accessory fastenings.
• Compact form makes it suitable for pit bags and on-track adjustments where space is limited.

Installation tips and care

• Match the 2.0mm tip squarely to the screw head to reduce cam-out and avoid rounding the hex.
• Keep the tip clean and free of debris; small metal shavings can accelerate wear on screw recesses.
• Store in a dedicated compartment or foam insert to prevent tip damage and to keep spare hex bits organized.