Kyosho FAT305BK Front Drift Wheel 14-Spoke Black 24mm (2pcs)  [KY-FAT305BK]

Front drift wheel description and use

This front wheel set is made for 1/10 on-road drift chassis and supplied as a pair. The 14-spoke black wheels measure 24mm in useful tread width and come as two pieces suitable for slip-style drift tyre fitting. The article focuses on practical fitment, tyre mounting and setup checks used by drift players.

• Compatibility: Intended for 1/10 on-road drift cars and compatible hubs that accept standard drift wheel adapters.
• Included: Set of 2pcs, front wheel role (pair only).
• Construction: Molded plastic 14-spoke wheel with a flat inner mounting surface for common drift tyres and foam inserts.
• Use: Suited for tyre tuning, front-end cosmetic replacement, and routine maintenance or setup experiments.

Practical tips for installation

Check hub adapter fit before gluing tyres. When mounting soft drift tyres, align the bead evenly and use light adhesive where required. Balance is less critical for drift front wheels than for touring rear drive wheels, but a quick spin check helps avoid wobble during slides. Mark wheel orientation if using directional tyres and keep a spare pair for track sessions.

Maintenance and setup notes

Clean residue from tyre glue with isopropyl alcohol and inspect spoke areas for any burrs after trimming. Replace foam inserts if they compress excessively; compressed inserts change tyre profile and affect turn-in. For tuning, try small changes in tyre width or tyre compound on the rear to balance overall drift behaviour while keeping the front set consistent.