Kyosho IF710-R Front Hub Carrier, Right 18deg for MP11 chassis  [KY-IF710-R]

Kyosho IF710-R - Front Hub Carrier (R/18deg/MP11)
Price:
USD$55.00
Brand:
Kyosho
Model:
KY-IF710-R
GTIN:
4548565518876
Condition:
Brand New
Write a review

Front hub carrier for MP11 (Right, 18deg)

The Kyosho IF710-R is specified as the right side front hub carrier sized for the MP11 chassis with an 18deg steering orientation. This part serves as the wheel spindle mounting point on the front suspension and is intended as a direct replacement for the matching MP11 hub assembly.

Use this hub carrier when restoring steering geometry or replacing a worn carrier after impacts. It maintains the designated 18deg steering angle for the right side so that overall toe and caster relationships remain consistent with MP11 setup expectations. It is intended for RC-scale vehicle maintenance and tuning only.

Installation notes: verify fitment on the MP11 upright and inspect related hardware such as ball bearings and hex screws for wear during replacement. When reassembling, confirm wheel alignment and steering throw before full-speed testing to ensure predictable handling.

Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Yes, the IF710-R designation indicates it is for the MP11 platform as the right front hub carrier with an 18deg specification.
The unit is designated as right 18deg, so it maintains that steering orientation; changing angle requires a different hub carrier code.
Check related bearings and fasteners for wear, torque hardware to manufacturer recommendations, and verify steering travel and wheel alignment before running.

Copyright © 2008-2026 rcjaz.com All rights reserved