Kyosho IFW326BL Wheel Hub Narrow for Inferno MP9 TKI4 (Blue, 4 pcs)  [KY-IFW326BL]

Replacement Narrow Wheel Hub for MP9 TKI4

The Kyosho IFW326BL is a narrow wheel hub supplied as a set of 4 pcs intended for RC-scale use on the Inferno MP Series MP9 TKI4. It is presented as a direct replacement part for wheel mounting where a narrow offset is required, supplied in a blue finish as indicated by the model code.

Functionally this hub serves the wheel assembly and helps locate the wheel relative to the axle and suspension arms. When replacing hubs, inspect existing wheel hexes and走珠軸承 for wear, confirm the hub mates cleanly with the hex and axle, and torque fasteners to the vehicle manufacturer’s recommended values to avoid slop or binding.

Installation note: remove the wheel and hex, fit the hub onto the axle or stub, check bearing alignment, and secure with the original hardware. If wheel play appears after installation, verify hex seating and bearing condition before altering suspension geometry.

Tuning role: choosing a narrow hub affects track width and can subtly change steering response and cornering balance. Use narrow hubs when you need reduced track width for handling adjustments, and re-check toe and camber settings after any hub change.