This is an RC-scale replacement wheel produced by GPM for Kyosho platforms, presented as a pair (1pr). The component is a nylon wheel with a five-pole spoke pattern in green, intended for 1/8 scale off-road buggies such as Hyper 7, MP9 and Inferno MP7.5 family models referenced in the original product title. The description below focuses on fitment considerations, basic installation notes, and the wheel's role within setup and tuning.
Compatibility and fitment: confirm hub bore and hex size on your chassis before installation, retain original wheel hex and washer orientation, and verify clearance with the suspension and body posts. This wheel is an RC accessory designed for 1/8 scale buggy use only.
Installation overview: remove the wheel nuts and original wheels, inspect hex and axle hardware for wear, slide the GPM nylon wheel onto the same hex and seat it flush, then re-fit washers and wheel nuts to the chassis torque you normally use. Check for any rubbing on the suspension arms or chassis components through a full steering range.
Tuning role: nylon wheels provide a different flex and weight compared with composite or aluminium rims; they can subtly affect cornering feedback and traction characteristics. Use them as part of incremental changes when adjusting tyre inserts, camber, or rebound to fine tune handling for track conditions.
Copyright © 2008-2026 rcjaz.com All rights reserved
