This Kyosho LA433 aluminum front suspension holder is an RC-scale spare designed for the LAZER ZX7.5 chassis. It replaces the standard front suspension holder and serves as a stable mounting point for the front suspension components on the model.
Made from gunmetal-finished aluminum, the part is intended to give a firmer mounting surface compared with typical plastic parts, helping maintain alignment under repeated loads. Its role is primarily structural for the front-end assembly and to support suspension tuning adjustments rather than altering suspension geometry on its own.
Installation guidance: remove the existing front holder and transfer any reusable hardware such as pins or ball studs, then fit the LA433 in the original mounting locations using the chassis screws. Check thread engagement of the existing screws and confirm clearances around the steering linkage and shocks before final tightening. Use a suitable hex driver and avoid over-torquing small screws to prevent stripping threads.
Tuning notes: this holder provides a consistent reference for shock and steering positions when adjusting spring rates, shock oil, or camber link lengths. It does not include shock mounts or ball studs, so retain those from the original assembly or use compatible replacements specified for the LAZER ZX7.5 platform.
Copyright © 2008-2026 rcjaz.com All rights reserved
